This 8GB industrial SD card contains the Loxone Audioserver firmware. It can be adjusted using the Loxone Config.

We recommend using only SD cards provided by Loxone.

. 8GB industrial Micro-SD card.
. Micro-SD card adapter.
. Lifespan up to 60 times longer than a conventional SD card.

The active PoE injector fits perfectly into the loxone Intercom and supplies it with the required operating voltage.

. Dimensions (80x45x33mm)
. 3 country adapters (EU, US, UK)

The high-quality dual mounting frame made of anodized aluminum is perfect for attaching the Intercom, NFC Code Touch (Gen. 2) or Touch Pure to any facade.
. Made of anodised aluminium
. Designed for outdoor use
. Extremely durable - 100% weatherproof
. Compact, ultra-flat design (188x90x11 mm)
. Also available in anthracite
. Sound guide built into the frame, for use with the Intercom (top mounting surface)
. Note: Always use the top mounting surface to use the Intercom.

The high-quality mounting frame made of anodized aluminium is perfect for attaching the Intercom, NFC Code Touch (Gen.2) or Touch Pure to any façade.
. Of anodised aluminium
. Designed for outdoor use
. Weatherproof
. Compact, ultra-flat design (90x90x11 mm)
. Also available in anthracite
. Sound guide built into the frame, for use with the Intercom

The SMA 4dBi 868 MHz rod antenna is a perfect component for products with Loxone Air technology.
Facilitate assembly outside the distribution cabinet.
. Transmit and receive 868MHz protocols.
. For all suitable SMA (female) connectors.

. Ideal for powering LEDs
. Mounting depth of only 44 mm
. Inaudible, no buzzing
. Wide input range from 90 to 264VAC (47-63 Hz)
. 24VDC output with 150W
. Direct connection to the mains thanks to the included power cable

The 24V 2.5A Power Supply allows you to power LED Spot Lights and other 24V devices. Their dimensions facilitate their placement in false ceilings.

. Fits perfectly to LED Spots
. Only 32mm mounting depth required.
. Wide input range of 90-305VAC
. Output voltage of 24V DC, 2.5A
. Quiet operation
. Operating temperature of -40...+70oC
. Suitable also for outdoor use

1.3A power supply with a sturdy enclosure for DIN rail mounting.
- Adapted for control with Loxone.
- Wide input range of 90V - 264V AC.
- Depth of only 56 mm.
- The output voltage can be adjusted between 24 - 28 V DC.

One cable for all Tree products, whether motion detectors, actuators or LED Spots. With the new loxone Tree cable, the installation and commissioning of all Loxone products is very fast. Standardized color coding minimizes installation errors and therefore saves valuable time.

Certified with the highest safety standards!
. Universal cable, ideal for all Tree devices
. Free of halogens
. Accurate color coding
. 200m high quality copper cable
. 2x1.5mm² (Orange / White)
. 2x0.6mm (Orange/White)
. 2x0.6mm (Green/White)
. Perfect for communication Loxone Tree
. Printed description of measurements
. The highest certifications: CPR class B2ca-s1a, d1, a1; Certificate . UL UL 13 - Limited Power Circuit Cable; UL Certificate UL 444 / CSA C22.2 No. 214 - Communication Cables

Compact power supply for 0.25 A (24V DC / 6W) installation.

. Powering NFC Code Touch Air, Touch Pure Air, Sensor Confort Air and all products with 24V power consumption
. Installation in box of mechanisms
. Wide range input from 90-264VAC
. Output voltage: 24VDC/6W
Fuel consumption on standby: 60mpg

This battery pack provides you with maximum flexibility for powering the Touch Surface. The 4x AA battery pack ensures a long-lasting supply for its operation.
- Power supply for the Touch Surface (Plug in & go)
- 4 AA 1.5V Batteries
- IP20 Protection
- 1m cable of 0.4mm²

Valve adapter suitable for 0-10V thermal actuators and 230V thermal actuators. The valve adapter is used to connect the actuator to the valve.

See compatible manufacturers in the product description.

Take the opportunity to combine different Loxone Miniserver firmwares conveniently via SD card swapping.

. 8GB SD card with adapter.
. Two variants: firmware for the Miniserver Gen.1 (100008) and firmware for the new Miniserver (100433)
. Miniserver update even without a network connection
. High quality industrial SD card (up to 60 times longer lasting than a conventional card)

Valve adapter suitable for 0-10V thermal actuators and 230V thermal actuators. The valve adapter is used to connect the actuator to the valve.
Suitable for valve manufacturer:
. Danfoss RA

Power Supply & Backup was developed to simplify wiring in the electrical panel and increase rail safety. It allows you to measure and display the power of individual sockets, providing information about faulty fuses or activation of Backup mode. It also guarantees operation in the event of a blackout or electrical failure.

. Safe from the first second – protects the building and the people in it
. Power outage without worry – access, lighting and security, even in the event of a power failure
. Full control – power measurement, power failure recording (battery operation), fuse monitoring
. Energy for the entire building – you save money and space

Technical details:
. 7 outputs 24VDC at 10A, total 40A - up to 60A in short periods (10s)
. Backup function for emergencies through an external 36VDC battery up to 200Ah
. Individual fuses, replaceable with spare parts
. DIN rail mounting (18TE)
. Digitally adjustable voltage (24-27 VDC)
. Connection to the main electrical network AC 230V
. Tree interface for complete integration into Loxone installation

Take the opportunity to combine different Loxone Miniserver Gen.1 firmwares conveniently via SD card swapping.

. 8GB SD card with adapter.
. Miniserver update even without a network connection
. High quality industrial SD card (up to 60 times longer lasting than a conventional card)

The Touch Surface can be powered thanks to the 24V Power Adapter, with a 150 cm long cable and finished with a 230V power socket.
. Power for the Touch Surface (Plug in and go)
. Input voltage: 90... 264VAC
. Short Circuit Protection
. Protection against overvoltage
. Cable length: 180 cm
. Low consumption: <75mW
. Adapters for EU, US, UK, AU

0.4A power supply with a sturdy enclosure for DIN rail mounting.
- Adapted for control with Loxone.
- Wide input range of 100V - 240V AC.
- Depth of only 56 mm.
- Output voltage of 24V.

The high-quality triple mounting frame made of anodized aluminum is perfect for attaching the Intercom, Touch Pure Flex, NFC Code Touch (Gen. 2), or Touch Pure to any façade.
- Made of anodized aluminum
- Designed for outdoor use
- Extremely durable - 100% weather-resistant
- Compact, ultra-flat design (286 x 90 x 15.5 mm)
- Integrated sound guide in the frame for use with the Intercom (top mounting surface)
Note: always use the top mounting surface when using the Intercom